It looks like there are instructions here about hosting your own flatpak instance: https://docs.flatpak.org/en/latest/hosting-a-repository.html

Doubling what Klaymore said, I’ve seen this “just work” as long as all partitions have the same password, no key files necessary.

That said, if you needed to use a key file for some reason, that should work too, especially if your root directory is one big partition. Keep in mind too that the luks commands for creating a password-based encrypted partition vs a keyfile-based encrypted partition are different, so you can’t, for example, put your plaintext password into a file and expect that to unlock a LUKS partition that was setup with a password.

But the kernel should be trying to mount your root partition first at boot time where it will prompt for the password. After that it would look to any /etc/crypttab entries for information about unlocking the other partitions. In that file you can provide a path to your key file, and as long as it’s on the same partition as the crypttab it should be able to unlock any other partitions you have at boot time.

It is also possible, as one of your links shows, to automatically unlock even the root partition by putting a key file and custom /etc/crypttab into your initramfs (first thing mounted at boot time), but it’s not secure to do so since the initramfs isn’t (and can’t be) encrypted - it’s kind of the digital equivalent of hiding the house key under the door mat.

Another solution to this situation is to squash your changes in place so that your branch is just 1 commit, and then do the rebase against your master branch or equivalent.

Works great if you’re willing to lose the commit history on your branch, which obviously isn’t always the case.

Sounds like a problem with Memmy. Does this link work? https://lemm.ee/c/sfah@hilariouschaos.com

You should be able to search communities in your app and could have searched “sfah@hilariouschaos.com” too.

But basically communities on Lemmy are in the form of “name@host”. The “name” can be whatever someone wants, and the “host” is the website / Lemmy instance where that community originates from. But because it is federated it’s all available everywhere (generally speaking). For example, if you visit https://lemmy.world/c/sfah@hilariouschaos.com it should be the same content just loaded via lemmy.world instead of lemme.ee. However if theoretically someone went and made a “sfah@lemmy.world” community, that would be a completely separate community from the above, hosted on a different Lemmy instance.

Out of curiosity, what content are you looking for? Discovery on Lemmy can be a problem, but sometimes the communities are there and even active, just buried.

But may I also suggest searching by Top Day/12-hour/6-hour to see the most active posts. Lemmy’s scaled algorithm still doesn’t get it quite right IMO.

The CEO said they were going to add pay-walled subreddits at an earnings call.

So… Yep.

Found a blog post that gives a quick overview of how to do git via email in general: https://peter.eisentraut.org/blog/2023/05/09/how-to-submit-a-patch-by-email-2023-edition

So at least from my understanding you’d make your changes, email the contents of the patch to the maintainer, and then they’d apply it on their side, do code review, email you comments, etc. until it was in an acceptable state.

There’s also the full kernel development wiki that goes into all the specifics: https://www.kernel.org/doc/html/v4.16/process/howto.html

(I never got through the whole thing)

I’ll also throw out: aging infrastructure, build systems, coding practices, etc.

I looked into contributing to the kernel - it’s already an uphill battle to understand such a large, complex piece of software written almost entirely in C - but then you also need to subscribe to busy mailing lists and contribute code via email, something I’ve never done at 30 and I’m betting most of the younger generation doesn’t even know is possible. I know it “works” but I’m really doubting it’s the most efficient way to be doing things in 2024 - there’s a reason so many infrastructure tools have been developed over the years.

The barriers to entry for a lot of projects is way too high, and IMO a lot of existing “grey” maintainers, somewhat understandably, have no interest in changing their processes after so much time. But if you make it too hard to contribute, no one will bother.

Out of curiosity, what switch are you using for your setup?

Last time I looked, I struggled to find any brand of “home tier” router / switch that supported things like configuring vlans, etc.

Maybe I am not thinking of the access control capability of VLANs correctly (I am thinking in terms of port based iptables: port X has only incoming+established and no outgoing for example).

I think of it like this: grouping several physical switch ports together into a private network, effectively like each group of ports is it’s own isolated switch. I assume there are routers which allows you to assign vlans to different Wi-Fi access points as well, so it doesn’t need to be literally physical.

Obviously the benefits of vlans over something actually physical is that you can have as many as you like, and there are ways to trunk the data if one client needs access to multiple vlans at once.

In your setup, you may or may not benefit, organizationally. Obviously other commenters have pointed out some of the security benefits. If you were using vlans I think you’d have at a minimum a private and public vlan, separating out the items that don’t need Internet access from the Internet at all. Your server would probably need access to both vlans in that scenario. But certainly as you say, you can probably accomplish a lot of this without vlans, if you can aggressively setup your firewall rules. The benefit of vlans is you would only really need to setup firewall rules on whatever vlan(s) have Internet access.

NPR News Now publishes great little 5 minute podcast digests every hour or 2 summarizing the big news items of the day / hour.

Their politics podcast and Trump’s Trials podcast are also good.

All three of these are very U.S. centric, obviously.

IIRC Alaska Airlines knew the plane had issues and decided to keep flying it anyway.

So yes, it’s Boeing’s fault the plane’s door blew off, but Alaska Airlines also deserves blame for continuing to fly a plane that was reporting issues with the door hatch.

I ran into the same thing. I’ve always just worked around it, but I believe I did find the solution at one point (can’t find the link now).

But if I am remembering right, I believe you need to manually create a bridge between the two networks - by default it isolates the VMs from TrueNAS itself for security reasons.

Sorry I can’t link the exact fix right now, but hopefully this will help you Google the post I found on the subject.

Simple thing, but are you sure you mounted the NFS share as NFSv4? I don’t have access to a machine to check right now, but I think it might default to mounting NFSv3, even if both sides support v4.

To add on to this answer (which is correct):

Your “of” can also just be a regular file if that’s easier to work with vs needing to create a new partition for the copy.

I’ll also say you might want to use the block size parameter “bs=” on “dd” to speed things up, especially if you are using fast storage. Using “dd” with “bs=1G” will speed things up tremendously if you have at least >1GB of RAM.

But on the other hand, if loans were subject to bankruptcy, most poor people would never be approved to get them.

I made one such tool!

https://github.com/CMahaff/lasim

I know there’s also a python script out there and a new Android app that has active syncing. I don’t have links handy to those on mobile.

Under this broad of a ruleset, all software would have to be open source.

Excellent work by the way, much better solution than my own :)

Didn’t get a chance to look at how your app works under the hood, but for LASIM I look up the community by name to get the ID and then call thr subscribe API. The former did seem to trigger the Lemmy instance to “learn” about the community, but it takes awhile, and there is no way to know when it has learned it other than to retry looking it up a few times.